How the Mow Flow Pro Works
Follow our simple 5-step process for a clean, mess-free oil change on your Honda push mower โ no drip pans, no spills, no hassle.
See the Mow Flow Pro Tutorial
5 Steps to a Mess-Free Oil Change
Attach the Mow Flow Pro
Twist the Mow Flow Pro in a clockwise manner into the mower's oil fill tube until it is snug. Don't over tighten it โ just push and twist until it is snug.
Stretch a Balloon Over the Device
Take one of the included heavy-duty balloons and stretch the opening over the Mow Flow Pro's outlet end, extending down to cover the oil fill tube about 1 inch. This creates a sealed, leak-proof container that catches every drop of used oil.
Tip the Mower on Its Side
Carefully tilt your mower toward the oil fill side. The oil flows through the Mow Flow Pro funnel directly into the balloon. No drip pans, no puddles, no mess on your driveway.
Refill with Fresh Oil
Remove the Mow Flow Pro, set your mower upright, and pour in fresh SAE 10W-30 oil to the full mark on the dipstick. You're done โ your mower is ready to go and your driveway is spotless.
Recycle Old Oil
Once the new oil is in the mower, pour the contents of the balloon into the empty oil container and take it to your local oil recycling center.
The Old Way vs. The Mow Flow Pro Way
โ The Old Way
- โ Oil spills all over the driveway
- โ Fumbling with drip pans and funnels
- โ Stained clothes and dirty hands
- โ Messy disposal in random containers
- โ Takes 30+ minutes of cleanup
- โ Harmful oil runoff into storm drains
โ Mow Flow Pro Way
- โ Zero spills โ every drop captured
- โ One simple device replaces all the mess
- โ Clean hands, clean clothes
- โ Sealed balloon for easy disposal
- โ Done in under 5 minutes
- โ Eco-friendly โ no oil reaches the ground